Propane tanks and lines
Low tanks, frozen regulators and air in the lines after a refill can all stop a propane furnace in rural homes.

Furnace Repair | Henderson County
No heat in Lexington or the rural communities of Henderson County? Call to get connected with an independent provider who repairs gas, propane and electric furnaces in the area.
Enter your ZIP code on the call to find a nearby technician.
Henderson County has natural gas in parts of Lexington, but many homes in Huron, Regan, Luray and around Wildersville rely on propane or electric heat. Wooded lots and hilly roads can also make rural visits take longer.
Cold snaps here are usually short but sharp, and a furnace that has not been checked since last winter is the one most likely to fail on the first cold night.
See the Lexington and Henderson County page for notes on each place.
Local angle
Fuel type and access shape most heating calls in this region.
Low tanks, frozen regulators and air in the lines after a refill can all stop a propane furnace in rural homes.
Equipment tucked into a crawl space or attic is harder to maintain, so filters and flame sensors are more often neglected.
Electric furnaces and heat pump backup strips can fail during long cold spells, leaving the blower running with little warmth.
Leaves, nests or damage to a furnace flue can trip the pressure switch and stop the burners from lighting.
Homes that switched between a furnace and a heat pump over the years sometimes keep a thermostat set up for the old equipment, which can cause odd heating behavior.
Clear directions help on rural calls, especially near Natchez Trace State Park where roads wind through the woods. Mention landmarks or the nearest crossroads.
Lake homes around Lexington that are used part of the year may need the furnace checked before a winter visit. Ask for an inspection when you call.
Keep carbon monoxide alarms working in any home with gas or propane heat, and never use an oven or grill to heat the house.
Sugar Tree and the homes near the river can see damp, chilly mornings that make a house feel colder than the thermometer suggests. If the furnace runs but rooms still feel cold and clammy, mention it so airflow and humidity can be checked.
Check the tank gauge and that the furnace switch is on. If the tank is low or empty, contact the propane supplier first. If there is fuel and it still fails, call.
Yes. Leaves, nests and debris can block a vent or intake, which trips the pressure switch. Look from the ground, and leave clearing high vents to a technician.
It can help. A technician can clean the flame sensor, check the burners and venting and confirm safe operation before you rely on it.

Next step
Describe what the system is doing and get connected with an independent provider who serves the area.
Enter your ZIP code on the call to find a nearby technician.